Deployed in multiple roles in different industries, this PUF Chemical stays always in demand in the common space. It is used in the manufacture of high-resilience foam seating, rigid foam insulation panels, microcellular foam seals and gaskets. This contains all required materials and other necessary for foaming. The PUF Chemical that we offer comes with accurate composition in its ideal state. We deliver the ordered units at fixed price rates within promised time frame without any delay.
SRETSPL PUF SOLUTION ( Polyol & MDI )
1. GENERAL PROPERTIES AND APPLICATIONS
It can be used in combination with Isocyanate to produce rigid polyurethane foam intended specifically for use to manufacture discontinuous sandwich panel systems. It contains all the raw material and additives necessary for foaming.
------- Good flow properties
------- Good density distribution
------- High compression strength
------- Good dimensional stability
------- Very good adhesion with the facing materials when facings are preheated to 35-40 Â° C
The product has a shelf life of 6 months after delivery, provided it is stored in moisture-tight containers at about +20 Â° C.
3. HANDLING PRECAUTIONS
Due to its alkaline nature, it can cause slight to moderate irritation on direct contact with the skin, eyes and mucous membranes, particularly if contact is prolonged.
Safety goggles and impermeable protective gloves should always be worn if there is a risk of direct exposure when handling this product.
Splashes in the eyes should be removed immediately by careful flushing with copious amounts of water. If irritation persists, medical attention should be obtained.
Splashes on the skin should be wiped off immediately, after which the contaminated areas should be thoroughly washed with soap and water.
A good barrier cream should then be applied.